Recent Posts

Recent Post

6/recent/ticker-posts

How to Put Silent in Truecaller, means

How to Put Silent in Truecaller,With Meaning


   Truecaller does not have a specific "silent mode" feature. However, you can adjust your phone's settings to enable silent or vibrate mode for all incoming calls, including those from Truecaller. Here's how you can do it on popular mobile operating systems:

     NOTE: Device and truecaller application both silent with volume key,volume button, there is no other way to put truecaller on silent mode, you can test by putting your device in silent mode.


1. Locate the volume buttons: The volume buttons are typically located on the side of your Android phone. Depending on the device, there may be separate buttons for volume up and volume down, or a single button with two parts.


2. Press and hold the volume down button: Press and hold the volume down button until the volume reaches its lowest level. This will usually put your phone into vibrate or silent mode, depending on your device's settings.


3. Check the silent mode indicator: Once you have pressed and held the volume down button, check your phone's screen or notification panel to see if there is an indicator that shows the silent or vibrate mode. It may be represented by a crossed-out bell icon or a speaker icon with a line through it.


4. Test the silent mode: To confirm that your phone is in silent mode, you can try calling your phone from another device or sending a test notification. If your phone is in silent mode, it should not make any sound or vibrate when receiving calls or notifications.


Remember that the steps above are general guidelines, and the specific behavior may vary depending on your Android device's make and model. If you encounter any difficulties or your phone does not enter silent mode using the volume key, you may need to consult your device's user manual or contact the manufacturer for further assistance.

On Android:

1. Open the Phone app or Dialer on your Android device.

2. Tap the three-dot menu icon or the settings gear icon, usually located in the top-right corner of the screen.

3. Select "Settings" from the menu.

4. Look for the "Sound" or "Sounds and Vibration" option and tap on it.

5. Adjust the settings to enable silent or vibrate mode for calls.


On iOS (iPhone):

1. Go to the Settings app on your iPhone.

2. Scroll down and tap on "Sounds & Haptics" or "Sounds."

3. In the "Ringer and Alerts" section, toggle the "Vibrate on Ring" or "Vibrate on Silent" option to enable vibration.

4. Turn on the silent switch on the side of your iPhone to enable silent mode. This will silence both ringtones and vibrations for incoming calls.


By enabling silent or vibrate mode on your phone, you can effectively mute all incoming calls, including those identified by Truecaller. Keep in mind that this will silence all calls, not just those from specific callers or Truecaller's identification alerts.



Publicar un comentario

0 Comentarios